sales@skyproducts.ca

1.855.888.6869

Let's get started

If you’re too busy to chat now, please enter your cell # and message below and we will text you back as soon as possible.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.

S-5! SolarFoot™

The SolarFoot provides an ideal mounting platform to attach the L-Foot of a rail-mounted PV system to the roof. This solution is The Right Way to secure rail-mounted solar systems to exposed fastener metal such as AG-Panel or R-Panel.

Features:
Designed for exposed-fastened metal roof solar mounting attached via L-Foot and rails
Compatible with all rail manufacturer’s L-Foot components
Attaches directly to structure or deck for optimal holding strength
Proper sealant selection never left to chance; no messy or risky field application of sealant
Low center of gravity reduces moment arm commonly associated with L-Foot/rail solar racking
Stainless integrated stud and serrated, hex-flange nut secure the L-Foot into position

FAQs

How does S-5! ensure its brackets are weathertight?

S-5! brackets feature integrated sealant reservoirs to prevent over-compression of the seal and to protect the sealant from UV degradation. No risky, field applied sealants are ever used. No need to source sealant materials. Instead, you get permanence, convenience, maintenance freedom, ease of installation, a complete assembly, and peace of mind.

Double Seal
EPDM factory-seal is used on sheeting-only attached brackets that mount on roof ribs or corrugations out of the drainage plane. This creates a “double-seal” by way of the EPDM washer on the fasteners from above and the pre-applied EPDM on the feet of the bracket from below.

Triple Seal
A watertight, factory-applied, 60-year butyl polymer seal is used on our brackets that attach to the decking or structure in the drainage plane of the roof. This butyl polymer along with the EPDM seal on the fasteners forms what we call a “triple seal”.  The first seal is formed by the washer on the fastener from the top side. The second seal is the butyl polymer beneath the feet of the bracket, and the third is formed as the fastener is driven into the substrate, pulling butyl polymer into the threads of the fastener.

Should I use additional sealant around the brackets?

No, it will deteriorate with exposure and can then do more harm than good.

Get a quote for a projectBuy now from our warehouse
30-Day Money-Back Guarantee
Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.