S-5!® LEED Credits

S-5!® Products are available from Canada’s largest stocking distributor in Canada

web: www.skyproducts.ca

Materials and Resources

LEED Credit 2—Construction Waste Management (1-2 points)
The components in S-5! clamps and PV kits are made from 60601 T6 aluminum and 300 series stainless steel hardware. They are fully recyclable at the end of their service life and can be part of a construction waste management program to be diverted from disposal, allowing for the building to qualify for points in Credit 2.

Credit 4—Recycled Content (1-2 points)
The components in S-5! products are high in recycled content which help a building qualify for points in Credit 4. For more information on Recycled Content of metal roofing materials refer to the Metal Construction Association at www.metalconstruction.org/Technical/RecycledContent.

LEED Sustainable Sites

Credit 7.2—Heat Island Effect: Roof (1 point)
Metal roofs are available in a selection of colors and finishes that comply with the Solar Reflectance Index criteria in Sustainable Sites Credit 7.2.

USGBC references the Cool Roof Rating Council which lists the solar reflectance, thermal emittance and solar reflectance index values of roofing products at www.coolroofs.org.

LEED Energy and Atmosphere

PREREQUISITE 2. Minimum Energy Performance (Required)
Using S-5! products to secure rooftop renewable energy systems on a metal roof can help the building qualify for the prerequisite of demonstrating a 10% improvement in the proposed building performance rating compared with the baseline building performance rating.

Credit 1—Optimize Energy Performance (1-19 points)
Using S-5! products to secure rooftop renewable energy systems can help the building qualify for points based on a demonstrated percentage improvement in the proposed building performance compared to the baseline building performance rating using Appendix G of ASHRAE Standard 90.1-2007.

Credit 2—On-Site Renewable Energy (1-7 points)
Using S-5! products to secure rooftop mounted photovoltaics can help the building qualify for points in Credit 2 for the use of on-site renewable energy systems to offset building energy costs.

LEED Water Efficiency

Credit 1—Water Efficient Landscaping; Credit 2—Innovative Wastewater Technologies; Credit 3—Water Use Reduction (up to 10 points, collectively)
Metal roofs are ideal for rainwater harvesting in order to reduce the use of potable water for unnecessary applications. Their clean, smooth and inert surfaces are less prone to contamination by dust, leaves, soiling and other debris than rougher roof products. When rainwater is collected for interior water uses or irrigation, it is preferable to use relatively inert materials such as metal instead of petroleum-based roof products such as composite shingles, bituminous membranes and asphalt coatings. Using S-5! products in a rain water collection system can help the building qualify for points in Credits 1, 2 and 3.

LEED Regional Priority

Regional Priority (up to 4 points)
The energy and environmental benefits described in this guideline could also provide Regional Priority credits depending on the location of the building. Refer to the USGBC website for information on Regional Priority credits that may be available in your area at www.usgbc.org.

Leave a Reply

Your email address will not be published. Required fields are marked *

Have Questions? Need More Info?

Fill out the form below to book a free consultation or a callback from one of our roofing professionals.